| 271 | 3 | 179 |
| 下载次数 | 被引频次 | 阅读次数 |
研究了不同表面处理工艺对TA15钛合金中厚板弯曲性能的影响，通过开展表面粗糙度检测、表面SEM电子显微镜观测以及极限弯曲试验，确定了最佳表面处理工艺.结果表明：采用120#千叶轮抛光+酸洗减薄工艺可以使板材表面平整度和光洁度得到明显改善，表面粗糙度平均值降至0.13μm;抛光和酸洗联合工艺可以消除板材表面微观潜在裂纹源，降低板材因表面质量问题而过早发生开裂的风险，极限弯曲角增大至52°～54°,较原始表面提高了54.29%～60.61%,板材弯曲性能得到有效提升.
Abstract：The effects of different surface treatment processes on the bending properties of TA15 titanium alloy medium and thick plates were studied. The optimal surface treatment process was determined through surface roughness testing, surface SEM observation, and extreme bending tests. The results show that the surface flatness and finish of the plate can be significantly improved by using a 120# impeller polishing and pickling thinning process, with a reduced average surface roughness of 0.13 μm. The combined process of polishing and pickling can eliminate the potential sources of micro cracks on the plate, and reduce the risk of premature cracking due to surface quality issues. The extreme bending angle is increased to 52°～54°, which is 54.29%～60.61% higher than the original surface. The bending performance of the plate has been effectively improved.
[1] 刘奇先，刘杨，高凯.钛合金的研究进展与应用[J].航天制造技术，2011(4):45-48.(Liu Qixian,Liu Yang,Gao Kai.Research progress and application of titanium alloys[J].Aerospace Manufacturing Technology,2011(4):45-48.)
[2] 杨冠军.钛合金研究和加工技术的新进展[J].钛工业进展，2001(3):1-5.(Yang Guanjun.New progress in titanium alloy research and processing technology[J].Titanium Industry Progress,2001(3):1-5.)
[3] 黄旭，朱知寿，王红红.先进航空钛合金材料与应用[M].北京：国防工业出版社，2012:26-27.(Huang Xu,Zhu Zhishou,Wang Honghong.Advanced aeronautical titanium alloys and applications[M].Beijing:National Defense Industry Press,2012:26-27.)
[4] 《中国航空材料手册》编辑委员会.中国航空材料手册：第10卷[M].2版.北京：中国标准出版社，2002.(The editorial board of “China aeronautical materials handbook”.China aeronautical materials handbook:volume 10[M].2nd ed.Beijing:Standards Press of China,2002.)
[5] 张小红，林鑫，陈静，等.热处理对激光立体成形TA15合金组织及力学性能的影响[J].稀有金属材料与工程，2011,40(1):142-147.(Zhang Xiaohong,Lin Xin,Chen Jing,et al.Effects of heat treatment on the microstructures and mechanical properties of TAl5 titanium alloys by laser solid forming[J].Rare Metal Materials and Engineering,2011,40(1):142-147.)
[6] 孙永娜，柳长旭，吴国清.TB5钛合金薄板微观组织与弯曲性能关系研究[J].航空制造技术，2017,60(18):48-52.(Sun Yongna,Liu Changxu,Wu Guoqing.Research on relationship between microstructure and bending properties of TB5 sheet[J].Aeronautical Manufacturing Technology,2017,60(18):48-52.)
[7] 张晶宇，杨延清，陈彦，等.退火对TA15钛合金组织与性能的影响[J].金属热处理，2003,28(3):46-48.(Zhang Jingyu,Yang Yanqing,Chen Yan,et al.Effect of annealing on the structure and properties of TA15 titanium alloy[J].Heat Treatment of Metals,2003,28(3):46-48.)
[8] 厉文墨，蒋健博，刘芳芳，等.钛钢复合板TA2钛复层表面洁净处理工艺[J].材料与冶金学报，2022,21(5):358-363.(Li Wenmo,Jiang Jianbo,Liu Fangfang,et al.Cleaning process of TA2 cladding surface of titanium steel composite plate[J].Journal of Materials and Metallurgy,2022,21(5):358-363.)
[9] 贺飞，陈海峰，王玉会.显微组织对TA15合金高温拉伸性能的影响[J].材料工程，2012,40(2):13-15.(He Fei,Chen Haifeng,Wang Yuhui.Effect of microstructure on high temperature tensile properties of TA15 titanium alloy[J].Journal of Materials Engineering,2012,40(2):13-15.)
基本信息:
DOI：10.14186/j.cnki.1671-6620.2024.05.009
中图分类号:TG146.23
引用信息:
[1]祝鹤,杨立新,卢影峰,等.表面处理工艺对TA15钛合金中厚板弯曲性能的影响[J].材料与冶金学报,2024,23(05):478-483.DOI:10.14186/j.cnki.1671-6620.2024.05.009.